MID FIRE GLAZES ACTION: Receive 15% off with code SPEEDBALL15. Runs through May 31.
Please note: We will be closed on May 29. No packages will be shipped this day!

Bowl makin’ Chloe Profile lomer

 26,10

Size Lomer height 10 cm x width 13.5 – 5-12 cm To turn a 532 ml bowl Use 900 grams of clay to do this Turn a cylinder approximately 13.330 cm high x 11.43 cm wide Also use the Chloe profile lomer for a cappuccino, goblet base or mug. The possibilities are endless! The teeth allow you to vary edge thickness and shape. 7 tools in one!!!

In stock

Description

General instructions for WiziWig Profile Rib

Each WiziWig Profile Rib creates two consistent profiles. The bottom line on each rib is used to compress the clay at the edge of your clay piece, depending on the thickness of your clay.

1. On a potter’s wheel, turn a cylinder with the dimensions and weight listed for your particular WiziWig Rib.

2. With one hand on the inside of the cylinder and the other hand holding your WiziWig Rib on the outside of the cylinder, press your Rib into the cylinder while applying gentle pressure to the outside with your inside hand, giving it the profile shape of your WiziWig Rib.

3. Do this gently until a continuous, smooth line of clay touches your Rib. This should be done several times. Make sure there is enough water between the lomer and the clay.

4. For a nice, round edge, choose an edge size at the bottom of your WiziWig Rib and place it over your edge with gentle pressure.

5. Leave as is or add your own flare!

You might also like this...